研究成果：
[1] Rujun Sun, Daming Zhuang*, Ming Zhao*, Qianming Gong, Yaowei Wei, Guoan Ren, and Yixuan Wu, “Cu2ZnSnSSe4 solar cells with 9.6% efficiency via selenizing Cu-Zn-Sn-S precursor sputtered from a quaternary target”, solar energy materials and solar cells. 2018, 174: 42-49
[2] Rujun Sun, Daming Zhuang*, Ming Zhao*, Qianming Gong, Yaowei Wei, Guoan Ren, and Yixuan Wu, “Beyond 11 % efficient Cu2ZnSn(SSe)4 thin film solar cells by cadmium alloying”, solar energy materials and solar cells. 2018, 174: 494-498
[3] Leng Zhang, Daming Zhuang*, Ming Zhao*, Qianming Gong, Li Guo, Liangqi Ouyang, Rujun Sun, Yaowei Wei, Shilu Zhan, Xunyan Lyu, Xiao Peng. “Investigation on Sb-doped induced grain growth and mechanisms of Cu(InGa)Se2 films by sputtering process with Se-free annealing." Solar Energy 2017, 157: 1074–1081
[4] Leng Zhang, Daming Zhuang*, Ming Zhao*, Qianming Gong, Li Guo, Liangqi Ouyang, Rujun Sun, Yaowei Wei, Shilu Zhan, Xunyan Lyu, Xiao Peng. “A Study on mechanisms of Sb-doping induced grain growth for Cu(InGa)Se2 absorbers deposited from quaternary targets.” Journal of Alloys and Compounds 2017, 727: 572-578
[5] Leng Zhang, Daming Zhuang*, Ming Zhao*, Qianming Gong, Li Guo, Liangqi Ouyang, Rujun Sun, Yaowei Wei, Shilu Zhan, Xunyan Lyu, Xiao Peng. “Sb2S3 thin films prepared by vulcanizing evaporated metallic precursors.” Materials Letters 2017, 208: 58–61
[6] Leng Zhang, Daming Zhuang*, Ming Zhao*, Qianming Gong, Li Guo, Liangqi Ouyang, Rujun Sun, Yaowei Wei, Shilu Zhan. “The effects of annealing temperature on CIGS solar cell by sputtering from quaternary target with Se-free post annealing.” Applied Surface Science 2017, 413: 175-180
[7] Leng Zhang, Daming Zhuang*, Ming Zhao, Qianming Gong, Li Guo, Liangqi Ouyang, Rujun Sun, Yaowei Wei, Shilu Zhan. “The effects of selenium content on CuInGaSe2 thin film solar cells prepared by sputtering from quaternary target with Se-free post annealing.” Vacuum 2017, 137: 205-208
[8] PENG Xiao, ZHAO Ming*, ZHUANG Daming*, SUN Rujun, ZHANG Leng, WEI Yaowei, LV Xunyan, WU Yixuan, REN Guoan. “ Eliminating the excess CuxSe phase in Cu-rich Cu(In,Ga)Se2 by In2Se3treatment”. Journal of alloys and compounds. 709(2017)31-35
[9] PENG Xiao, ZHAO Ming*, ZHUANG Daming*, SUN Rujun, ZHANG Leng, WEI Yaowei, LV Xunyan, WU Yixuan, REN Guoan. “Multi-layer strategy to enhance the grain size of CIGS thin film fabricating by single quaternary CIGS target” . Journal of alloys and compounds. 710(2017)172-176
[10] PENG Xiao, ZHAO Ming*, ZHUANG Daming*, SUN Rujun, ZHANG Leng, WEI Yaowei, LV Xunyan, WU Yixuan, REN Guoan. “Fabricating Cu(In,Ga)Se2(CIGS) thin films with large grains based on the quaternary CIGS targets” Vacuum 146 (2017)282-286
[11] Sun, Rujun, Ming Zhao, Daming Zhuang, Xiaolong Li, Qianming Gong, Liangqi Ouyang, Li Guo, and Mingjie Cao. "Cu2ZnSnS4 ceramic target: Determination of sintering temperature by TG–DSC." Ceramics International 2016, 42:9630-9635
[12] Li Guo, Ming Zhao, Daming Zhuang, Qianming Gong, Hao Tan, Mingjie Cao, Liangqi Ouyang. A study on phase transformation of SnOx thin films prepared by reactive magnetron sputtering. Materials Science in Semiconductor Processing, 2016, 46, 35-38
[13] Liangqi Ouyang, Daming Zhuang, Ming Zhao, Qianming Gong, Li Guo, Rujun Sun, Leng Zhang. Cu(In,Ga)Se2 solar cells fabricated by sputtering from copper-poor and selenium-rich ceramic target with selenium-free post treatment. Materials Letters, 2016, 184: 69-72
[14] Rujun Sun, Ming. Zhao, Daming Zhuang, Qianming Gong, Min Xie, Liangqi Ouyang. Li Guo. Leng Zhang, Effects of selenization on phase transition and S/(S+Se) ratios of as-deposited Cu2ZnSnS4 absorbers sputtered by a quaternary target. Materials Letters, 2016, 164:140-143
[15] Xiaolong Li, Ming. Zhao, Daming Zhuang, Mingjie Cao, Liangqi Ouyang, Li. Guo, Zedong Gao, Rujun Sun, Influences of Na on sintering of Cu(In, Ga)Se2 quaternary ceramic targets. Journal of Alloys and Compounds 2015, 636:335-340
[16] Xiaolong Li, Ming Zhao, Daming Zhuang, Mingjie Cao, Liangqi Ouyang, Li Guo, Rujun Sun, Zedong Gao, Fabrication of Se-rich Cu(In1-XGaX)Se2 quaternary ceramic target. Vacuum, 2015, 119:15-18
[17]Liangqi Ouyang, Daming Zhuang, Ming Zhao, Ning Zhang, Xiaolong Li, Li Guo, Rujun Sun, Mingjie Cao. Cu(In,Ga)Se2 solar cell with 16.7% active-area efficiency achieved by sputtering from a quaternary target. Physica Status Solid A
[18] Liangqi Ouyang, Ming Zhao, Daming Zhuang, Junfeng Han, Zedong Gao, Li Guo, Xiaolong LI, Rujun Sun, Mingjie Cao. Annealing treatment of Cu(In,Ga)Se2 absorbers prepared by sputtering a quaternary target for 13.5% conversion efficiency device. Solar Energy, 2015, 118, 375–383
[19] Guo Li, Zhao Ming, Zhuang Da-Ming, Cao MingJie, Ouyang Liangqi, Li Xiaolong, Sun Rujun, Gao Zedong. Influences of CuO phase on electrical and optical performance of Cu2O films prepared by middle frequency magnetron sputtering. Applied Surface Science, 2015, 359, 36-40
[20] Gao Zedong, Zhao Ming, Zhuang Daming, Fu Engang, Li Xiaolong, Ouyang Liangqi, Guo Li, Sun Rujun, Kimura Kenji, Nakajima Kaoru.Study on the performance of Tungsten-Titanium alloy film as a diffusion barrier for iron in a flexible CIGS solar cell. Solar Energy, 2015, 120, 357-36
[21] Xie Min, Zhuang Daming, Zhao Ming, Li Bojian, Cao Mingjie, Song Jun. Fabrication of Cu2ZnSnS4 thin films using a ceramic quaternary target[J]. Vacuum, 2014, 101: 146-150
[22] Jiang Liu, Da-ming Zhuang, Ming-jie Cao, Xiao-long Li, Min Xie, Da-wei Xu, Cu(In,Ga)Se2-based solar cells prepared from Se-containing precursors, Vacuum, 2014, 102: 26-30
[23] Liangqi Ouyang, Ming Zhao, Daming Zhuang, Junfeng Han, Li Guo, Xiaolong Li, Mingjie Cao. The relationships between electronic properties and microstructure of Cu(In,Ga)Se2 films prepared by sputtering from a quaternary target. Materials Letters, 2014, 137: 249–251
发明专利：
1. Convenient maintenance type property management access control identification device for property management, has supporting seat whose inner portion is provided with adjusting component.
FU X; ZHUANG D; ZHUANG L
公开日期: 2024-10-22 申请日期: 2024-02-18 公开号: CN221884366U
2. Intelligent city safety warning board for traffic management, environment monitoring and disaster early warning, has supporting component comprising connecting box fixedly connected on two sides of top end of bottom plate.
PEI H; ZHUANG D; ZHUANG L
公开日期: 2024-10-11 申请日期: 2024-01-30 公开号: CN221824908U
3. Active clamp photoelectric sensing device for detecting object, has active clamp circuit that is coupled to current-to-voltage conversion circuit, and is used to clamp upper limit of first output voltage to second set voltage.
JUANG D; ZHUANG D
公开日期: 2024-10-03 申请日期: 2023-11-13 公开号: US2024328853A1
4. Photoelectric sensing device for canceling crosstalk while detecting object in accordance with optical properties, has current-voltage conversion circuit that is coupled to switch and configured to receive input current corresponding to cosstalk signal.
TING H; JUANG D; DING H; ZHUANG D
公开日期: 2024-10-03 申请日期: 2023-11-13 公开号: US2024333264A1
5. Preparing image transmission optical fiber preform comprises preparing mother core rod, drawing mother core rod into thin core rod, drawing filling rod, stacking thin core rods with target number in sleeve, and inserting at least two monofilaments with different outer diameters in gaps of core rods.
ZHUANG D; YANG C; ZHENG X; WANG R; LUO J; ZHANG L; LI P
公开日期: 2024-10-01 申请日期: 2024-06-28 公开号: CN118724449A
6. Wireless network card adapter board for adapting fifth generation (5G) wireless communication module interface to third generation/fourth generation (3G/4G), has DC-DC power supply circuit whose output end is connected with input end.
ZHUANG D; SUN W; DING N; YAN W
公开日期: 2024-10-01 申请日期: 2023-08-29 公开号: CN221807207U
7. Anti-interference capacitance sensing device comprises control circuit used for converting capacitance value sensed by internal capacitance sensing element into reference reading value and converting capacitance value sensed by external capacitance sensing element into external reading value.
YANG Z; XIE H; ZHUANG D
公开日期: 2024-10-01 申请日期: 2023-03-31 公开号: CN118740137A
8. Active clamp photoelectric sensing device for detecting object, has active clamp circuit that is coupled to current-to-voltage conversion circuit, and is used to clamp upper limit of first output voltage to second set voltage.
JUANG D; ZHUANG D
公开日期: 2024-10-01 申请日期: 2023-05-05 公开号: CN118732069A
9. Photoelectric sensing device for canceling crosstalk while detecting object in accordance with optical properties, has current-voltage conversion circuit that is coupled to switch and configured to receive input current corresponding to cosstalk signal.
TING H; JUANG D; DING H; ZHUANG D
公开日期: 2024-10-01 申请日期: 2023-05-04 公开号: CN118738146A
10. Mini backlight display device, has rectangular frame whose inner wall is fixedly connected with fixing block, where middle part of rectangular frame is provided with back plate, and left and right sides of back plate are connected with limiting plate.
ZHUANG D; ZHANG Q
公开日期: 2024-09-27 申请日期: 2024-02-27 公开号: CN221782868U
11. Method for welding steel/aluminum heterogeneous material by adding laser modified zinc intermediate layer, involves using pulse laser to punch circular hole-shaped matrix with different diameters and gaps on surface, and obtaining steel-aluminum lap welding head by heat conduction technique.
WANG J; LI Y; WANG Z; HAN K; ZHAO X; ZHUANG D; ZHU C; XU B; ZHANG S; WANG D
公开日期: 2024-09-27 申请日期: 2024-07-25 公开号: CN118699523A
12. Medical breathing filter joint for tracheostomy patients, has joint main body whose upper side is provided with sputum suction port that is connected with lower side connecting port.
HONG S; LU Q; ZHENG B; CHEN H; ZHUANG D
公开日期: 2024-09-24 申请日期: 2023-11-20 公开号: CN221751864U
13. High-safety double-camera for property management, has spring fixedly connected at front and back sides of gate, where side of gate far away from rotating shaft is sleeved with rubber sleeve and outside of gate is provided with alarm component.
FU X; ZHUANG D; ZHUANG L
公开日期: 2024-09-17 申请日期: 2024-01-30 公开号: CN221726590U
14. Mini LED backlight module for providing backlight in LCD, has LED lamp plate whose surface is provided with LED lamp mounting groove whose inner surface is fixedly connected with LED light emitting lamp.
ZHUANG D; WANG Q
公开日期: 2024-09-13 申请日期: 2024-02-26 公开号: CN221707846U
15. Remote control device for intelligently identifying application scene, has camera provided with wireless receiving module and magnetic mechanism, where middle of magnetic mechanism is provided with receiving module.
LIN Z; HUANG Z; ZHUANG D; HE B; DAI Z
公开日期: 2024-09-13 申请日期: 2023-11-08 公开号: CN221707908U
16. Graphene heating shoe for dismounting and replacing, has mounting groove that is provided with buckle for fixing switch and is connected with switch through clamping device.
ZHANG T; ZHUANG D
公开日期: 2024-08-20 申请日期: 2023-12-15 公开号: CN221554795U
17. Backlight module for use in display device, has lamp plate arranged on back plate, and reflecting unit comprising first and second reflecting parts, where arc reflecting surface includes surface tangent whose slope is not fixed value.
GAO P; WU J; ZHUANG D; LU X; LI J; KAO P; WU C; LU H
公开日期: 2024-08-11 申请日期: 2023-07-17 公开号: TW852683B1
18. High abrasion-resistant erosion-resistant co-extrusion wood-plastic floor, has connecting block corresponding to arc-shaped clamping groove that is provided with rubber bump matched with groove, where top part of plate body is provided.
ZHUANG D
公开日期: 2024-08-06 申请日期: 2023-11-17 公开号: CN221481274U
19. Automatic cleaning power frequency flashover locator, has electromagnetic valve installed in water channel structure, where electromagnetic valve is connected with storage battery installed at inner side of solar panel through lead.
BAI J; ZHUANG D; WU Z; CHEN J; JI R
公开日期: 2024-06-25 申请日期: 2023-10-31 公开号: CN221227483U
20. Edge sealing device for processing Mini LED lamp backlight module, has locating part comprising mounting plate, first sliding rod, second spring, two extending plates and two locating plates.
ZHUANG D; LIU T
公开日期: 2024-06-21 申请日期: 2023-10-31 公开号: CN221200158U
庄大明
北京市
研究领域：
研究方向：
1．铜铟镓硒（CIGS）基薄膜太阳电池制备与性能
2．铜锌锡硫（CZTS）基薄膜太阳电池制备与性能
3．陶瓷靶材的烧结工艺
4．其他功能薄膜材料的制备与功能特性
所在单位：
清华大学
