论文著作：
[1]Influence of pre-recovery on recrystallization behavior, microstructure and mechanical properties of twin-roll cast AA6016 sheet[J].Materials Science and Engineering A, 2019 (764) : 138-159.
[2]Effect of Prestraining and Preaging on Properties of Al-Mg-Si Alloys Before and After Plane Baking[J].Journal of Materials Engineering and Performance, 2019 (28) : 4496-4501.
[3]Flow behaviour constitutive model of CuCrZr alloy and 35CrMo steel based on dynamic recrystallization softening effect under elevated temperature[J].Journal of Central South University, 2019 (26) : 1550-1562.
[4]Insight in the properties of WO3|Y: a first-principle study[J].Results in physics, 2019 (15) : 02670.
[5]Cryorolling-Induced Texture, Mechanical Properties and Fracture Behavior of Al-Mg-Si Alloys During Cold Deformation[J].Journal of Materials Engineering and Performance, 2018, 27 (8) : 3932-3939.
[6]Poisoning of Zr microstructures during casting homogenisation and solution treatment[J].Materials Science and Technology, 2018 (1) : 47-53.
[7]Hot tensile deformation and fracture behaviours of Hastelloy C-276 alloy[J].Materials Science and Technology, 2018 (5) : 620-627.
[8]Stabilities, electronic and elastic properties of L12-Al3(Sc1-x,Zrx) with different Zr content: A first-principles study[J].Physica B:Condensed Matter, 2018 (548) : 27-33.
[9]Study of orientation relationship between Al matrix and several typical inclusions in Al alloy by edge-to-edge matching model[J].Journal of Materials Research, 2017, 32 (11) : 2092-2099.
[10]Study of Adsorption of Hydrogen on Al, Cu, Mg, Ti Surfaces in Al Alloy Melt via First Principles Calculation[J].Metals, 2017 (7) : 21.
[11]Critical Condition of Dynamic Recrystallization in 35CrMo Steel[J].Metals, 2017 (7) : 161.
[12]First Principles Study of Adsorption of Hydrogen on Typical Alloying Elements and Inclusions in Molten 2219 Al Alloy[J].MATERIALS, 2017 (7) : 10-17.
[13]Microstructure and mechanical properties of cryo-rolled AA6061 Al alloy[J].Transactions of Nonferrous Metals Society of China, 2016, 26 (1) : 12-18.
[14]Effect of homogenization on the corrosion behavior of 5083-H321 aluminum alloy[J].Journal of Alloys and Compounds, 2016 (673) : 73-79.
[15]Relevance between microstructure and texture during cold rolling of AA3104 aluminum alloy[J].Journal of Alloys and Compounds, 2016 (673) : 383-389.
[16]Hot tensile deformation behaviors and constitutive model of 42CrMo Steel[J].Materials and Design, 2014 (53) : 349-356.
[17]弥散相对3003铝合金再结晶晶粒尺寸的影响[J].材料工程, 2018, 46 (6) : 65-72.
[18]Al-Ti-B合金中AlB2、TiB2和TiAl3的第一性原理研究[J].中国有色金属学报, 2018, 28 (8) : 1491-1498.
[19]再时效处理对2219-T6铝合金叉形环显微组织和力学性能的影响[J].中国有色金属学报, 2016, 26 (7) : 1365-1371.
[20]复合能场铸轧对AZ61镁板组织及性能的影响[J].中国有色金属学报, 2014 (8) : 1960-1967.
科研项目：
[1]高强铝合金薄壁高筋大型壁板精确成形制造技术基础
[2]重型运载火箭部段连接高强型材框材料论证研究
[3]高强高淬透性铝合金厚截面材料凝固组织与强韧性的均匀化多场调控
[4]超强高韧耐蚀铝合金成分与多相适配微结构模式设计
[5]XX火箭部段连接高强型材框拉弯工艺研究及材料稳定性验证
[6]800MPa级高强高韧铝合金高纯均质细晶铸造
[7]高性能动力电池软包铝塑膜用铝合金箔技术开发
[8]铸轧法生产高性能电池铝箔技术开发
[9]超深井钻探用高强耐蚀抗疲劳铝合金套管材料/构件研制
[10]汽车用高性能铝合金材料/构件制备技术与工程化应用研究
[11]高强高韧Mg-Al-Zn-RE-X镁合金材料开发
[12]高性能铝合金板带箔材制备技术研究
[13]高精CTP铝版基冷塑性加工技术研究
[14]短流程铸轧制备Al-Zn-Mn合金汽车散热器片铝箔技术与产品开发
黄元春
湖南省
研究领域：
新材料
研究方向：
[1] 高性能铝合金、镁合金、铜合金材料设计
[2] 大型复杂轻合金构件精确流变成形及性能调控
所在单位：
中南大学
