论文著作：
[1] WANG C J, WANG C, LI Z H*, et al. Mechanical properties of novel 3D printing 316L stainless steel honeycomb structure reinforced aluminum matrix composites [J]. Intermetallics, 2025, 157: 108014.
[2] FAN S Y, LI Z H*, XIAO W L*, et al. Effects of Different Processing Paths on the Microstructure, Mechanical Properties and Electrical Conductivity of Dilute Al-Zr-Sc Alloy Conductive Wires [J]. Journal of Materials Science & Technology, 2024, 168: 154-164.
[3] Wang C, Wang C J, Li Z H*, et al. Microstructure and properties of 316L lattice/Al composites by additive manufacturing and infiltration with different temperature [J]. Journal of Materials Processing Technology, 2024, 289: 118069.
[3] Zhang Z J, Li Z H*, Wang B, et al. Effect of processing parameters on formability of Ti6Al4V at constant volumetric energy density by laser powder bed fusion [J]. Optics and Laser Technology, 2024, 170: 109896.
[4] Wang B, Li Z H*, Zhang Z J, et al. Role of Stable Keyhole Mode in the Formability, Microstructure, and Mechanical Properties of High Layer Thickness in Laser Powder Bed Fusion of Ti-6Al-4V Alloy [J]. Journal of Materials Engineering and Performance, 2023, 32 (19): 8704-8716.
[5] 邓煜华，黎振华 *, 姚碧波，等。激光功率与扫描速度对选区激光熔化钴铬合金组织性能的影响 [J]. 表面技术，2023, 52 (1): 213-221.
[6] Shen J B, Li Z H*, Li H Y, et al. Additive manufacturing of high relative density Cu-0.8Cr alloy by low power 1064 nm Yb-fiber laser powder bed fusion: Role of Nano-TiC modification [J]. Materials Letters, 2022, 318: 132158.
科研项目：
(1) 国家自然科学基金委员会, 地区科学基金项目, 52561011, 激光增材-原位铸渗钛铝双金属轻质高强力学超材料性能调控及强化机理研究, 2026-01-01 至 2029-12-31, 主持
(2) 云南省科技重大专项项目课题，202402AG050003-2，高强度高塑性球墨铸铁成分设计及调控技术研发, 2024-07-01 至 2027-06-30, 主持
(3) 云南省贵金属实验室开放基金课题, 基于数据驱动的阵列式稀贵金属粉末及增材制造开发及应用, 2024-10-01至2026-09-30, 主持
黎振华
云南省
研究领域：
新材料
研究方向：
(1) 增材制造、3D打印与合金新材料
(2) 铸造与耐磨材料
(3) 铝、钛合金及成形
所在单位：
昆明理工大学
