论文著作：
[1] K. Yang, W. Bai, B. Li, H. Chen, G. Li, G. Wei, J. Liu, Thermal Deformation Behavior and Microstructural Evolution of Multicomponent Mg-Li-Zn-Al-Y Alloys under Hot Compression, Materials, 17 (2024).
[2] G. Li, Y. Yang, B. Ran, H. Chen, Y. Wang, W. Xie, G. Wei, Microstructure evolution and strengthening mechanisms of high-strength Mg-5Al-1Mn-0.5Zn-0.5Ca by rotary forging, J. Alloys Compd., 981 (2024).
[3] B. Li, X. Sun, H. Chen, Y. Yang, Q. Luo, X. Yang, Y. Chen, G. Wei, Q. Li, F. Pan, Enhancing Mg-Li alloy hydrogen storage kinetics by adding molecular sieve via friction stir processing, J. Mater. Sci. Technol., 180 (2024) 45-54.
[4] F. Kong, H. Feng, H. Chen, Y. Lin, Y. Wang, W. Xie, G. Wei, Y. Yang, X. Peng, Non-basal Slips Mediated Dynamic Recrystallization Promote Synergistic Strengthening and Toughening of Centrifugal Casting Mg–1.1Mn–0.5Al Alloy via High Strain Rolling, Metals and Materials International, 30 (2024) 517-532.
[5] X. Cui, W. Liu, Y. Yang, Y. Zhang, R. Li, G. Wei, Q. Li, B. Jiang, X. Peng, F. Pan, High-strength Mg-6Li-3Al-0.4Ce alloy fabricated by rotary swaging, Scripta Mater., 243 (2024).
[6] X. Cui, Y. Guo, Y. Yang, Y. Zhu, G. Zhou, T. Cao, Q. Luo, G. Wei, Q. Li, B. Jiang, X. Peng, F. Pan, High-ductility Mg-9Li-1Zn-2Gd-1.2Mn alloy prepared via traditional hot extrusion, Materials Science and Engineering: A, 893 (2024).
[7] M. Zhang, K. Yang, G. Wei, W. Xie, Y. Yang, B. Li, H. Chen, Q. Yang, AZ31/GNP magnesium composites with excellent comprehensive mechanical properties prepared by friction stir processing and rolling, Journal of Materials Research and Technology, 25 (2023) 3078-3092.
[8] Q. Yang, D. Zhang, P. Peng, G. Wei, J. Zhang, B. Jiang, F. Pan, Asymmetric Extrusion Technology of Mg Alloy: A Review, Materials, 16 (2023).
[9] B. Li, H. Chen, G. Li, G. Wei, W. Xie, Strengthening and toughening mechanisms of CNTs/Mg–Al composites prepared via powder metallurgy combined with hot extrusion, Vacuum, 214 (2023).
[10] B. Li, H. Chen, X. Ke, G. Wei, Q. Yang, Improving the Mechanical Properties of Mg-5Al-2Ca-1Mn-0.5Zn Alloy through Rotary Swaging, Materials, 16 (2023).
[11] F. Kong, X. Zhang, H. Chen, H. Liu, C. Fan, W. Xie, G. Wei, Improving Interfacial Strength and Corrosion Resistance of Fiber Metal Laminates by Phosphating Magnesium Substrates, Journal of Materials Engineering and Performance, 32 (2023) 7050-7062.
[12] F. Kong, W. Xie, G. Wei, Z. Ma, H. Chen, C. Fan, Microstructure evaluation and thermal deformation behaviours of wrought magnesium alloys, Materials Science and Technology (United Kingdom), 39 (2023) 283-299.
[13] F. Kong, H. Chen, X. Cui, B. Li, Y. Yang, X. Peng, W. Xie, G. Wei, Texture weakening and ductility improvement of Mg-1.1Mn-0.5Al alloy via medium temperature-high reduction rolling: twinning variants selection and dynamic recrystallization mechanism, Journal of Materials Research and Technology, 25 (2023) 3243-3257.
[14] H. Chen, M. Zhang, F. Kong, B. Li, X. Cui, Y. Huang, N. Hort, R. Willumeit-Römer, W. Xie, G. Wei, Effect of extrusion and rotary swaging on the microstructural evolution and properties of Mg-5Li-5.3Al-0.7Si alloy, Materials Science and Engineering: A, 885 (2023).
[15] H. Chen, Y. Yang, F. Hu, X. Liu, F. Kong, X. Cui, W. Xie, G. Wei, Y. Yang, X. Peng, Y. Huang, Improvement of severe plastic deformation realized by several passes rotary swaging in the microstructure and properties of Mg-0.6Mn-0.5Al-0.5Zn-0.4Ca alloy, Materials Science and Engineering: A, 865 (2023).
[16] H. Chen, Y. Yang, C. Hu, G. Zhou, H. Shi, G. Jiang, Y. Huang, N. Hort, W. Xie, G. Wei, Hot deformation behavior of novel high-strength Mg-0.6Mn-0.5Al-0.5Zn-0.4Ca alloy, International Journal of Minerals, Metallurgy and Materials, 30 (2023) 2397-2410.
[17] H. Chen, C. Hu, F. Hu, X. Liu, F. Kong, W. Xie, G. Wei, Y. Yang, X. Peng, Y. Huang, N. Hort, Effect of rotary swaging on the microstructure and mechanical properties of high-strength Mg-Mn-Al-Ca-Zn alloys, Mater. Charact., 196 (2023).
[18] G. Zhou, Y. Yang, L. Sun, J. Liu, H. Deng, C. Wen, G. Wei, B. Jiang, X. Peng, F. Pan, Tailoring the microstructure, mechanical properties and damping capacities of Mg–4Li–3Al–0.3Mn alloy via hot extrusion, Journal of Materials Research and Technology, 19 (2022) 4197-4208.
[19] Z. Ma, Y. Yang, Q. Peng, X. Fu, G. Wei, W. Xie, X. Peng, Effects of Centrifugal Casting and Hot Rolling on Microstructure and Mechanical Properties of Mg-10Gd-3Y-1Sn Alloy, Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 51 (2022) 858-865.
[20] Z. Ma, G. Li, Z. Su, G. Wei, Y. Huang, N. Hort, A. Hadadzadeh, M.A. Wells, Hot deformation behavior and microstructural evolution for dual-phase Mg–9Li–3Al alloys, Journal of Materials Research and Technology, 19 (2022) 3536-3545.
[21] Z. Ma, G. Li, Q. Peng, X. Peng, D. Chen, H. Zhang, Y. Yang, G. Wei, W. Xie, Microstructural evolution and enhanced mechanical properties of Mg–Gd–Y–Zn–Zr alloy via centrifugal casting, ring-rolling and aging, Journal of Magnesium and Alloys, 10 (2022) 119-128.
[22] J. Liu, C. Li, H. Lu, Y. He, Y. Wang, G. Wei, Deformation behavior and phase transformation of a dual-phase Mg−8.9Li−2.7Al-0.85Si alloy under compression test at elevated temperatures, J. Alloys Compd., 927 (2022).
[23] F. Kong, Y. Yang, H. Chen, H. Liu, C. Fan, W. Xie, G. Wei, Dynamic recrystallization and deformation constitutive analysis of Mg–Zn-Nd-Zr alloys during hot rolling, Heliyon, 8 (2022).
[24] F. Hu, H. Chen, R. Liu, G. Wei, F. Qiu, H. Li, W. Xie, Microstructural evolution and its effects on the mechanical properties of fine-grained Mg-3Gd during tension, Materials Science and Engineering: A, 855 (2022).
[25] G.L. Gu, X.N. Ke, F.P. Hu, S.J. Zhao, G.B. Wei, Y. Yang, X.D. Peng, W.D. Xie, Fine-grained Mg–1Mn–0.5Al–0.5Ca–0.5Zn alloy with high strength and good ductility fabricated by conventional extrusion, Transactions of Nonferrous Metals Society of China (English Edition), 32 (2022) 483-492.
[26] H. Chen, L. Sun, X. Ke, F. Kong, W. Xie, G. Wei, Y. Yang, X. Peng, Microstructure evolution and mechanical properties of the Mg–5Al–1Mn-0.5Zn-xCa alloys prepared by regular extrusion, Materials Science and Engineering: A, 858 (2022).
[27] X. Bai, C. Hu, G. Wei, G. Li, H. Chen, B. Li, Good strength-plasticity compatibility of GNP/AZ31 composites fabricated by FSP: Microstructural evolution and mechanical properties, Journal of Materials Research and Technology, 20 (2022) 3995-4007.
[28] Z. Wang, X. Wang, F. Liu, F. Hu, H. Chen, G. Wei, W. Liu, W. Xie, Different deformation behaviour between zirconia and yttria particles in dispersion strengthened platinum-20% rhodium alloys, Johnson Matthey Technology Review, 65 (2021) 112-119.
[29] Z. Ma, Q. Peng, G. Wei, Y. Yang, T. Xu, W. Xie, G. Liu, X. Peng, Improvement of Microstructure, Mechanical Property and Corrosion Resistance of Mg–9Li–3Al–1Ca Alloy Through Centrifugal Casting, Metals and Materials International, 27 (2021) 4498-4509.
[30] G. Li, X. Bai, Q. Peng, G. Wei, Z. Ma, Hot deformation behavior of ultralight dual-phase mg-6li alloy: Constitutive model and hot processing maps, Metals, 11 (2021).
[31] H. Deng, Y. Yang, M. Li, X. Xiong, G. Wei, W. Xie, B. Jiang, X. Peng, F. Pan, Effect of Mn content on the microstructure and mechanical properties of Mg–6Li–4Zn-xMn alloys, Progress in Natural Science: Materials International, 31 (2021) 583-590.
魏国兵
重庆市
研究领域：
新能源
研究方向：
（1）超轻镁锂合金塑性变形过程中的组织演变、数学模型及数值模拟(CAD/CAE)
（2）搅拌摩擦加工制备石墨烯、碳纳米管等增强镁基复合材料
（3）汽车用材料瞬态变形过程中的数值仿真及失效分析
（4）高性能玻璃纤维、玄武岩纤维增强复合材料成型方法及性能研究
（5）镁基储氢材料、新能源材料制备技术
所在单位：
重庆大学
